Uni Plast SP is an organic based liquid high performing super plasticizer and high range water reducing action. It enhances mobility, workability and obvious strengthening effects so that advantages of accelerating project mould turnover and construction speed. It can be used with most local cement and cementitious material with a margin on cement savings.
Uni Plast SP Uses
High Range Water Reducing And Super Plasticizing Concrete Admixture
Precast manufacturer, Ready mix producers, Civil Contractors and DIY professionals use Uni Plast SP in the production concrete for structures such as slabs and foundations, walls, columns, slender components with densely packed reinforcement, textures surface finishes, pre-stressed concrete, bridges and cantilever structures.
Uni Plast SP Advantages
- Offers high strength concrete with normal workability but lower water content
- Provides a concrete mix with less cement but high strength and workability
- Provides a good slump retention
- No retardant at normal dosage
- Reduces water up to 30 %
- Over 300 million Fibers per m3 of screed
- Concrete begins to flow easily and becomes self leveling
- Concrete becomes cohesive and does not have undesirable bleeding, segregation or loss of strength
- Non corrosive
- Reduces shrinkage
- Provides excellent flow properties
- Provides high early and final strength
Typical Properties & Specifications
| Sr. No. | Properties | Specification |
|---|---|---|
| 1 | Physical Appearance | Dark Brown liquid |
| 2 | Specific Gravity | 1.210 + 0.020 |
| 3 | Chloride content (%) | < 0.2 % (as per IS:9103 -1999) |
| 4 | Air entrainment | Less than 1% |
Instruction for Uni Plast SP Use
High Range Water Reducing And Super Plasticizing Concrete Admixture
Uni Plast SP can be added to the mixing water prior to its addition to the aggregates or directly to the freshly mixed concrete (the plasticizing effect is more pronounced). For ready Mix Concrete, Uni Plast SP can be added to the concrete immediately prior to discharge and after further mixing has taken place for three minutes.
Dosage
Dosage is depending on application of concrete and
grade. Hence, trial mix is suggested strongly. Normal dosage is from 0.6 %
TO 1. 5% of cementious materials. We strongly recommend trial mix because
conditions of use, materials used, ingredients, environmental factors are
changed site to site.
Effects of over Dosage
When overdosing beyond the design limit occurs, it may
induce the onset of segregation and bleeding. Depending on the degree of
over-dosing, vigilant attention should be taken into action particularly in
the properties of concrete such as its consistency and cohesiveness.
Decisions should be based on this assessments.
Packing
Uni Plast SP is supplied in 1, 5, 10, 50, 100 and 200
litre drums.
Shelf Life & Storage
Uni Plast SP has a shelf life of 12 months from date of
manufacture when kept at a temperature between 0 0 5 C to 45 C and store in
the original, unopened bags. All material shall be stored under cover in a
manner that will prevent damage preferable on pallets and protected from
excessive heat and moisture. Do not freeze.
Quality Assurance
Universal Construction Chemicals is a firm of Assessed
Capability. The company's quality system conforms to ISO 9001:2015.
Health & Safety
Uni Plast SP is not a fire or health hazard. Spillages
should not be left to enter sewers/surface or ground water, it should be
washed down with plenty of water immediately. In case of eye contact or
ingestion, seek medical attention without delay. Do not dispose of into
water or soil but according to local regulations. Uni Plast SP is made from
organic chemicals. Considered as non-toxic and non-hazardous according to
relevant health and safety codes.
Uni Plast SP Standards Compliance
Uni Plast SP conforms to ASTM C 494 type F & IS: 9103-1999.
