UNI TILE FIX is a polymer modified high quality tile/stone adhesive for jointing and bonding of all types of tiles, stones on horizontal and vertical surface. UNI TILE FIX consists of specialized polymers, cement, graded sand and other material which combine to give superior strength, water retention and stability. It replaces the conventional method and material of tile fixing with a revolutionary 2-3 mm joint thickness. UNI TILE FIX only requires addition of water before application to prepare the product for use. UNI TILE FIX is manufactured at ultramodern set up with strict quality control.
Coverage of UNI TILE FIX
At 3 mm bed thickness – 40 to 60 sq. ft for 20 kg bag
Key Features of UNI TILE FIX
- Self curing thus shrinkage cracks are minimised
- Ready to mix
- Large quantity of material can be prepared due to longer pot life
- It has excellent adhesion properties. No slip is observed on vertical applications.
- Floor can be made available for traffic after 24 hrs.
Product Characteristics
| Parameter | Values |
|---|---|
| Physical nature | Free flowing and grey in color |
| Water demand for ease in application | 25-30 % (by weight) |
| Pot life | Approx. 30 minute |
| Efflorescence | Negligible |
Technical Specifications
| Parameter | Values |
|---|---|
| Tensile Adhesion strength@28 days | Initial > 0.5Mpa After Immersion > 0.5 Mpa |
| Compressive strength of mortar @ 28 days | ≥ 5 Mpa |
| Slip Resistance@20 kg/sqm | 0 mm |
| Open time | 5 to 6 min |
| Adjustment Time | 5 to 6 min |
| Setting Time | Initial – 3 to 5 hrs Final - 5 to 7 hrs |
| Bulk density | 1.5 to 1.6 g/cc (in standard testing conditions) |
Mixing and Application of UNI TILE FIX
- For mixing, gradually add 3 parts of UNI TILE FIX to 1 part of water (by volume) to avoid any lump formation.
- Mix first for 3 to 5 minutes by hand of electrical mixer to mix homogeneously.
- Allow mortar to stand for next 2 to 3 minutes so that additives may react with water.
- Mix again for 2-3 minutes. Now UNI TILE FIX is ready to use.
- Before application clean the surface of floor or wall so that they are free from any dust.
- Spread UNI TILE FIX evenly on entire surface of the tile/stone in such a way to maintain the bond thickness 3 mm. Use toothed trowel to spread the tile adhesive over tiles.
- Firmly press tiles over the surface.
- Do not disturb the tile surface after application of tile adhesive for at least 24 hours. The setting time is affected by climatic conditions, allow stand along time accordingly.
Care to be taken
Do not add external sand or cement at the time of mixing UNI TILE FIX with water at site
Recommended tools for UNI TILE FIX application for Better performance
Disclaimer: Information on this datasheet is to be treated as guideline for usage. Users are advised to undertake a trial for product suitability prior to it’s full scale usage. There is no express or implied guaranty/warranty for the results. The company is not liable for any consequential damages.
